DIY Kate Spade Glitter Earrings

DIY Kate Spade Glitter EarringsThese DIY Kate Spade Glitter Earrings are a project I’ve wanted to undertake for two years now – two whole years! The backstory is that three years ago, my eyes landed on the originals around the holidays and I put them at the top of my Christmas list for all to see. Though I received some absolutely wonderful presents that yea, as I do every year (thanks, fam!), these multi-color glitter studs weren’t waiting for me under the tree. “Not to despair!” I told myself, “If not Christmas, then Valentine’s Day!” But many others shared my delight with them and they were sold out everywhere by the start of the new year. Insert: sad trombone.

I searched high and low for over a year with no promise of a return in sight, so I planned and I schemed on how I could recreate them – I just needed the perfect base earrings to build my shimmery beauties. You know how it goes though, life happened and other projects emerged and my idea for the recreation sat idling on the back burner. But finally, in December of this year, I took the bull by the horns and bought a pair of matte faux stone studs for $3.51 from Forever 21 and began auditioning my treasure trove of glitter nail polishes for a good combination.

DIY Kate Spade Glitter EarringsI wanted pink to be more present in my pair than in the originals. I mean, if I had creative control of this process, I thought that I might as well shoot for the moon! I settled on some complimentary glitter polishes that I already owned – namely, Sally Hansen’s Cheery On Top and China Glaze’s Shine-nanigans, which has a lot more depth and pinkness to it than the photo below would suggest. I also selected New York Color’s Wine Bar to up the magenta quotient by using it as a background color to the glitters; I applied it as a base coat since the earrings I upgraded were grayish white.

DIY Kate Spade Glitter EarringsThese DIY earrings require a little patience, as it pays to let the layers of color and glitter set up a bit before applying the next coat. I used a small stiff angled brush to more aggressively push the glitter around to the spots I wanted it and, at the end, I also used it alongside some cotton swabs and nail polish remover to clean up the areas where my handiwork got a little messy. I sealed the earrings not with clear top coat, as one might be tempted to do considering we’re working with a lot of nail polish here, but rather with this amazing glaze by Americana. It took about 24 hours to fully cure, but it gave the earrings a smooth, slightly domed finish just like the originals and also imparted some really great shine.

DIY Kate Spade Glitter EarringsFor those of you prepared to leave me a comment letting me know Kate Spade went and did a girl a solid and re-released these opulent little gems this past holiday season, I know! But I have to be honest: for less than a third of the original price (way less if you use nail polish you already own or repurpose an old pair of earrings), I think this DIY version is a pretty fantastic dupe! Within minutes of wearing them out into the world for the first time, I got three sets of compliments from three entirely different, unrelated people – that equals success in my book! My only regret is not buying more pairs of the Forever 21 studs so that I could recreate these for all of my earring-wearing, glitter-loving Galentines out there – lucky for all of us, they’re still online here. Small miracles, I say!

Happy Valentine’s Day, everyone! XOXO

DIY Kate Spade Glitter Earrings
Materials
One pair of cushion-cut stud earrings; I used these from Forever 21
Your choice of glitter nail polishes (consider one with finer glitter and one with chunky, hexagonal pieces)
A nail polish, or acrylic craft paint, to use for your base color (optional)
Small, stiff angled brush
Cotton swabs
Nail polish remover
Americana Triple Thick Brilliant Brush-on Gloss Glaze
Foam or cardboard to poke the earrings into for ease of handling when painting and for elevated drying

Directions
Remove your earrings’ backs and poke the stems into a piece of sturdy foam or stiff cardboard so that there is at least half an inch between the back of the earring and the surface of the foam/cardboard. This will help keep the earrings elevated and make them easier to maneuver and see all sides as you paint them. If your earrings are a light color or a color you dislike, use a nail polish or acrylic craft paint of choice to apply a thin base coat to the earrings. If you want one color in the glitter polishes to really stand out, choose this as your base color. I chose a magenta polish on my pair as the base. When dry, apply your first coat of glitter polish. Err on the side of lighter coats, of which you’ll need to apply several, as opposed to heavy, gloppy coats. The latter, obviously, takes more time to dry, but I also felt like I had less control over the distribution of the glitter when the top of the earring was overwhelmed by polish. The more lightly you apply the glitter polish, the less chance you’ll have of errant glitter getting stuck to the side and back hardware of the earrings. Repeat your coats of glitter polish using the stiff angled brush to manipulate the glitter into the patterns and positions of how you’d like it to appear.

After you’ve applied your final coat of glitter – I used about 5 coats – allow it to dry and clean up any spots or splatter with some nail polish remover and either the stiff angled brush or a cotton swab. Next, apply the glaze. I was more heavy-handed with the glaze because I knew I’d only be applying one coat. Paint it on thickly and make sure the surface is smooth and completely covered. As the glaze cures it will, initially, turn opaque white and then, as it hardens, it will lighten until it eventually becomes a smooth, clear, shiny casing. It’s amazing how much this glaze took these from an obvious (but still pretty!) DIY to something that looks much more, well, polished!

 

Valentine’s Day DIY Gift Guide

Valentine's Day Gift Guide: DIY Edition

Of the three Valentine’s Day 2015 Gift Guides I’ve done over the past few weeks (check out gifts for your main squeeze & gifts for your BFF!), this one is my favorite – Valentine’s Day DIY Gift Guide! I’ve combed Pinterest, my favorite blogs, and my own archive (Shameless! Absolutely shameless!) to give you the best suggestions for how to make Valentine’s Day a DIY affair this year. With budgets, skill levels, and genders in mind, I think you’ll find this gift guide all you need for making your boo, bae, or bff something special that reminds them of your love and care all 365 days of the year.

I’m in love with all of these DIYs, so I’ll tell you a little bit more about each of them:

1. This DIY Dino Valentine from Lovely Indeed is one of my most popular pins throughout the year. I think what makes it so instantly beloved is the transformation that occurs when you gild something ugly (or ferocious, in this case!) and turn it into something fancy! An ordinary dinosaur toy isn’t anything to look at, but with some gold paint and tiny arms filled with hearts, there’s nothing not to love! This DIY is quick, easy on the budget, and something your valentine will love regardless of age and gender. Imagine leaving this on the desk of your best officemate? Cu-ute!

2. Working with leather is such a popular trend right now and it’s definitely something I want to try in the future. This DIY leather iPad case tutorial from Martha Stewart also features instructions for a wallet, mouse pad, and pencil case, so the sky’s the limit!

3. For the past two years, Bear has added DIY leather key chains to every single list I keep for blog ideas on my desk, phone, computer, or elsewhere. It’s a new year, so I guess I’d better take a hint. This simple tutorial from 17 Apart includes plenty of photos to guide you in creating these functional little charmers. If you want to get fancy, grab a letter and number stamp kit and customize your key chains with initials or a meaningful date.

4. These DIY vanity trays are so quick, cheap, and easy, but look really luxe! They’re one of my most popular DIYs on the blog and have been featured in various spots online. Most recently, these beauties made it into a feature on Elle Decor’s website as one way to spruce up your bedroom in less than an hour. If they’re good enough for Elle, they’re good enough for your valentine!

5. Did you tragically miss out on the gorgeous Multi-color Glitter Stone Stud earrings that Kate Spade carried over the holidays? Me too. If I’m only drawing your attention to this bad news now, I’m so sorry. Not to worry though! This ingenious DIY from Shore Society will have you armed with a pair for your valentine (or yourself – I wouldn’t be able to resist!) in no time and, truly, they look as good as the originals. I’m in love!

6. If your valentine is experiencing winter in a colder climate, these DIY hand warmers are an adorable, loving way to tell someone you think they’re hot! Minimal sewing skills required and the designer, Rae, has even included a printable card to include with the hand warmers explaining how to heat and, well, handle them. Such a thoughtful gift!

7. My Hibernate with Me pillowcases are one of my favorite DIYs ever and I’ve made it so easy for you with images and text you just download and print. Grab some photo transfer printer paper and your iron and you’re in business! These take just a few bucks and less than an hour – they’re beloved by…everyone!

8. I spend so much time ogling projects put out by the contributors of the Purl Bee, the blogging spot from the creators of Purl SoHo, that it’s a wonder that I, myself, am not so much better at knitting, crocheting, and sewing. Truly, I’m a disaster. This Railroad Tote is a fantastic example of why I keep coming back to their site, though – it’s current, super useful, and a project I feel confident trying because of their awesome, step-by-step tutorials. I love that this tote appeals to the masses both in its style and function – what valentine of yours doesn’t need an extra place to stash their stuff or carry home their groceries?

9. The title of this DIY toiletry bag on Polkadot Chair is “Dad’s Travel Bag,” but this case is great for anyone, of any gender, when they’re planning to be out of town. I especially love that creator, Melissa, used such a bold, fun fox pattern on the inside to give it a little something special. This is a perfect Valentine’s Day gift for long distance loves – whether they be boos or friends – to remind them how much you look forward to their next visit.

10. Can you tell I really value organization and things having their place? Here’s a great tutorial for these adorable DIY clay jewelry dishes from Hello Natural. Aren’t they just so sweet with their scalloped edges and bright, bold paint job? These would be great paired with a set of scented tea lights candles so your valentine can use them as a candle dish to light up their bubble baths or in any other part of the house. For a finishing touch, wrap the metal exterior of the tea light with a washi tape that coordinates with the colors you chose for the dish. Instant hit!

I hope these DIY gifts inspire you and make you a hit among all your many loves for the big V-Day. You’ve got two weeks to go – get crackin’, lovies!

DIY Chalkboard Cake Toppers

DIY Chalkboard Cake ToppersWell, the semester has begun and though I wish I was creating blog content all the live long day, I’ve been back to teaching and guiding students through their first few weeks of gender & women’s studies classes. For the first time in a long time, I’m teaching some intro-level classes, which are my absolute favorite. Observing students as their minds are being blown is just the very best feeling as a teacher. These are the perks!

Before things really got underway this semester, though, I celebrated my birthday last week with a friend whose big day is just a day before mine. Surrounded by friends and loved ones, we drank champagne and ate an amazing Italian-inspired meal, al fresco, in our beautifully decorated side yard. It was quite a time! For dessert, I made us a giant cheesecake, covered in the season’s sweetest strawberries, and used these easy DIY cake toppers I had made the week before to make it extra special.

DIY Chalkboard Cake ToppersIf you follow my Instagram feed or checked out the highlights from Charlotte & Katie’s wedding feature, these may look familiar to you. I made Charlotte & Katie a pair for their wedding cake back in July and because they were just so easy (and almost criminally inexpensive), I followed up with a set for myself. What’s wonderful about them is that they’re reusable – the white paint that spells out your message of “Happy Birthday!”, or what have you, is written on a chalkboard paint background with a chalk marker! With a damp cloth, the slate is wiped clean and they’re ready to go for your next happy, cake-included, occasion.

DIY Chalkboard Cake ToppersYou’re limited here really only in terms of what shapes of wood you can find. While I’ve come across other shapes and sizes at Joann’s, these hearts are my favorite and are most applicable to a variety of holidays and events. Chalkboard paint, though, is available in so many different colors now and what you use as an accent color for the backs, edges, and skewers is entirely up to you. Now that I’m thinking of it, I wish I had tracked down a hot pink chalkboard paint because, paired with the metallic gold accent, it would have been a femme birthday dream come true!

DIY Chalkboard Cake ToppersThis is an easy craft that you can pull together in about an hour total, that costs only a few dollars, and will add a really personal touch to any future party. Arrange them on cakes, pies, cupcakes, and even stuck in the middle of a mound of cookies. They’re a sweet addition to any dessert and something you, or your loved one, can hang onto as a memory afterward or re-use in the future.
DIY Chalkboard Cake Toppers

DIY Chalkboard Cake Toppers

Supplies:
Two wooden cut outs in any shape; I used hearts from Joann Fabrics, which were under $1 each!
Chalkboard paint
Acrylic paint in color of your choice for backs, edges, and skewers
2 wooden skewers
Hot glue sticks & glue gun
Foam paint brush, about 1″ wide
Small thin-tipped paint brush, s square tip works best
Chalk marker, or regular chalk

Directions:
On a flat surface lined with newspaper, paint the backs and edges of your shapes with your accent color of choice; I used the foam brush for the back and the thin-tipped brush for the edges. If you get a slight bit on the front, just wipe it off as best you can, but don’t fret – the chalkboard paint will cover all. After the accent color has mostly dried – about 10 minutes – apply a second coat to backs and edges. When the second coat dries either move on to the following step or add a third coat if needed. Using the thin-tipped brush follow your shape and paint a perimeter on the front of the piece with the chalkboard paint so that you create a margin and don’t risk painting over the edge that you just painted with your accent color. Using the wider foam brush, fill in the shape with a coat of chalkboard paint and allow to dry. Follow this step for the front of the shape for at least three coats in order to get a truly opaque surface. Allow to dry completely. If need be, touch up the edge with your accent color.

When your shapes are completely painted and dried, heat your glue gun and ready your two wooden skewers. If you choose to paint the skewers in your accent color, painting them when you paint the shapes is the best plan, as painting them once they’re glued to the shapes is a bit awkward. Flip your shapes over so that the back side is facing up. Apply a small, 1/2″ or so line of hot glue to the back of the shape and press the top, non-pointed, side of the skewer into the glue. If the glue is not enough to encase the top of the skewer, apply a bit more glue over top so that it is covered. Do the same to the other shape & skewer and allow to dry completely. Hot glue is usually clear, so depending on your preference, you can either leave as is or, if you’d like, once the glue is hardened and cooled, you can use your accent color to paint over the glue and make it blend a bit more seamlessly. This step is optional.

Once the skewers are dried, the cake toppers are ready for use. Use a chalk marker for easy, seamless writing (or regular chalk if preferred) and spell out your message of celebration. Chalk markers can be easily removed with a damp cloth (avoid paper towel, as it catches on the paint and the wood). Allow surface to dry before re-printing.

Make Your Own Wedding Bouquet

DIY Wedding Bouquet | Femme FraicheIf you’re thinking about making your own wedding bouquet – or a hand-held bouquet for any occasion – but are concerned you won’t be able to hack it, I’m here to tell you to put fear aside and embrace the DIY! Making a bouquet, even a large one, even one for a very fancy affair, is not nearly as difficult as it seems. Truly, the hardest part is standing in front of a refrigerator full of flowers and deciding which ones work best together. Even then, though, I’ve got some tips to make that easier, as well.

Creating your own bouquet, or having someone in your wedding party make one for you, is so much more cost effective than going to a florist and shelling out at least $200. By making the bouquet yourself, you not only save money, but can really customize it to your tastes. With a few tips, some guidance, and patience, you can design a really gorgeous bouquet and for a price so small, you’ll feel like you got away with something really sneaky!

Charlotte's BouquetI recently created a gorgeous bouquet for my friend Charlotte’s wedding (above) and while it was far easier than I anticipated and came together really beautifully, my nerves were sky-high leading up to making it and throughout the process. Of course they were though, right? It’s a big job, and an important one, but also totally overrated in its presumed difficulty. You’ve got this!

Because I was focused hard on creating a beautiful bouquet, I didn’t enlist anyone’s help in taking photos throughout its construction. Curses! Fortunately, though, there were leftover flowers and the next day, I recreated a smaller version of Charlotte’s bouquet in order to lead you through the crafting of your own with some step-by-step instructions and photos. If you’re looking to make a larger bouquet, I’ll note in the tutorial where and how to continue adding flowers to make a very full, formal one like hers. At the end, I’ll also organize a list of some tips I figured out along the way.

I promise you that the hype – and expense! – of bouquets isn’t justified. With some patience and some know-how, anyone can make a stunning bouquet for any kind of special day.

Step 1: Select & prepare your flowers
The first thing you’ll want to do is select what flowers you’re going to use in your bouquet. Consider the head – or flowered section – of the bouquet as needing three distinct kinds of flowers – 1) those that make up the bulk of the head (this can be one or several different kinds of flowers), 2) those that give the bouquet some height or dimension, and 3) those that can be used as filler to bulk a section up or add some contrast. I chose to incorporate some bay leaf in this bouquet to create height and dimension to my bulk flowers – roses & carnations – and, if you look really closely, you might be able to tell that they’re artificial! For filler and stems, fake sprigs can add a lot of variety and drama for very little money.

DIY Wedding Bouquet | Femme FraicheTo prepare your flowers for the bouquet, remove all fresh leaves and thorns below each flower’s head and cut all stems on a 45 degree angle while under running water, then plunge immediately into a vase filled with room temperature water. Cutting the stems under water prevents an air pocket from immediately forming at the cut site, which will interfere with the flowers being able to take in as much water as they need; this is an especially important step when working with roses. As you work, keep your flowers in water and in a cool spot.

Step 2: Build your base
The first step to making a sturdy, tight bouquet is to build a solid base. As a foundation, this initial group of flowers will keep the center of the bouquet together, creating a strong neck by which to hold it. The base is important because it will be what you build out from in order to grow the bouquet to the size of your choosing.

DIY Wedding Bouquet | Femme FraicheCreate the base by pairing 4-5 flowers together in the pattern or arrangement that you like. Starting with the first flower in one hand, imagine it as the very middle of the bouquet. Add your second flower and hold the two tightly pinched between your forefinger and thumb, adding the third, fourth, and possibly fifth flowers in the same way, keeping them tightly gathered beneath the heads of the blooms. Don’t worry if, at this point, the stems are all pointing in awkward directions. All you want to be certain of is that the top of the flowers appears the way you’d like the middle of the bouquet to look and that the flowers are being held together tightly right below the heads.

DIY Wedding Bouquet | Femme FraicheNext, apply the end of a roll of floral tape no further than an inch below the flower heads and, while holding the stems tightly together,  wrap down the gathered stems about two inches. The tape doesn’t have to be perfectly wrapped or look very neat – you’re going to be adding more flowers and then ribbon to cover it all – it just has to be tightly wound, keeping your base very solidly together.

Step 3: Build out the head & tape
Once your base is solidly clustered and taped, the next step is to continue widening and building out the head of your bouquet. Here’s where you decide how big you want the bouquet and can continue adding concurrent layers of flowers accordingly to get the shape and size that you want. Employ the same tactics as above, adding and pinching the new flowers one-by-one around your base, holding them tightly. A loosely held bouquet will shift and appear sloppy, so keep those stems tight and, as needed, apply more floral tape to keep everything sturdy.

DIY Wedding BouquetIf you’re working with a mixture of different flower sizes – for example, in Charlotte’s bouquet, I used roses, carnations, and then large, white hydrangeas – consider symmetry when in doubt about how to further arrange the growing layers. Balancing one large flower on either side and then filling in the two remaining sides with similar, smaller flowers will keep the bouquet round and voluminous. If you don’t like how something looks, rearrange things. Nothing is set until you tape the final bunch and even then, you can unwrap and reassemble, or add additional flowers if they are needed.

DIY Wedding Bouquet | Femme FraicheWhen you have filled out the head of the bouquet to the point where you are satisfied, use the floral tape once more to begin tightly taping the stems together. Start, again, an inch or so below the heads of the flowers and wrap tightly, overlapping the tape, until you’ve reached approximately 2 inches above where you want the stems of the bouquet to end once you are prepared to cut them.

Step 4: Incorporating filler
For some reason, filler is my favorite part of creating a bouquet. I think it’s because of how it takes an already beautiful bouquet to a completely different level, but also because there’s so much you can consider using to add height and texture. As mentioned earlier, I used some artificial options – a spray of bay leaves and a stem of faux white berries – but also incorporated traditional baby’s breath because it’s just so dainty. Consider overbuying on the filler, choosing lots of different varieties, and then experiment once your bouquet is in-hand. You can’t know for sure what kinds of leaves, sprays, or baubles, your bouquet will benefit from until you have everything in front of you. Filler is an opportunity to really add a little extra beauty that is specific to your tastes and aesthetic.

DIY Wedding Bouquet | Femme FraicheDepending on the length of your filler, you may be able to just nestle it between the blooms, as desired, but if the pieces are longer, or fall more on the outside of your bouquet, you may need to, once more, tape the length of the bouquet handle from one inch below the flower heads to 2 inches above where you will trim the stems. If you’re concerned about filler falling out, you can always add a drop of hot glue to the end before nestling it down into the head of the bouquet.

Step 5: Finessing the handle & trimming stems
The bouquet head gets all the glory, but truth is that the handle can also be really gorgeous and eye-catching too. For both Charlotte’s bouquet and this re-creation here, I used a thick navy grosgrain ribbon and pearlized pins for a clean, classic finish. You can use any combination of ribbons, laces, twines, etc. that you can think of, so long as you can easily cover the floral tape and find a way to inconspicuously secure the ends.

DIY Wedding Bouquet | Femme Fraiche
With this bouquet, I wrapped the ribbon tightly over all of the visible floral tape. When I reached the end of wrapping, I cut the ribbon about a half inch too long and folded it under, creating a finished edge, stretched it as far around the handle as it would go, and held it firmly against the handle with my thumb. Using my other hand, I pinned into the fold and then into the stems, angling the pin upward into the handle so that it was securely fastened and safely ensconced in the handle, free from poking through to the other side and injuring someone. I proceeded to do this with several other pins, equal distance from one another, up the length of the bouquet handle. Of course, if pearlized pins are not your style or you’re using a twine or something similar, you could always just hot glue the end and tuck it beneath an area where the handle is wrapped.

DIY Wedding Bouquet | Femme FraicheLast, but not least, trim your stems straight across about two inches from the bottom edge of the handle wrapping. Handle length is entirely personal and, fortunately, something you can customize. Just remember to err on the side of caution and trim less before more. No one wants a stumpy bouquet!

When finished, place your bouquet in enough water to submerge the ends, but not wet the wrapped handle (see tips below regarding flower food). Bouquets can be kept overnight in the refrigerator if made the day before or left in there to keep cool if made the day of the event. Before doing so, verify that the flowers you’re using can withstand the coolness of a refrigerator, though, and are not a variety that will wilt in lower temperatures.
DIY Wedding Bouquet | Femme Fraiche
Tips & Tricks:

  • When selecting flowers, consider sturdier blooms for the bulk, nestling more delicate ones inside the bouquet. For the DIY bouquet maker, erring on the side of stronger, less delicate flowers, will allow more room for rearranging.
  • Finding flowers that are easily accessible and financially within your means are key parts to DIY-ing your bouquet. Google around your area for wholesale flower markets, many of which are open to the public, and also start scouting friends with Costco memberships. Yes, Costco! Believe it or not, they have gorgeous fresh flowers and at really reasonable prices – $16 for 2 dozen roses? Boom. Also check out markets that fancy themselves more “gourmet”-type establishments – Whole Foods, Trader Joe’s, Kowalski’s, if you’re in the Twin Cities, are all examples. They always have fresh, beautiful flowers available and, often, a wider variety compared to a standard grocery store.
  • Remember that you can always supplement with artificial pieces. I’m not suggesting making a silk flower bouquet, but filler, embellishment sprays, and leaves can be hard to find if you’re working the grocery store circuit for your bouquet. Check out local craft stores a week ahead of time and stock up on all kinds of potential. Save your receipt so that you can return the pieces you don’t use.
  • Use Pinterest as inspiration ahead of time and gather ideas there for flowers that work well together and bouquet handle designs that match your tastes. Print pictures, or save images to your phone, and take them with you when looking for flowers or materials from the craft store.
  • Give yourself plenty of time. This is a new endeavor and while it’s really not very difficult, it requires patience, and deftness of hand; rushing through will end in broken stems and petals askew. Think the whole process will take you 2 hours? Block off 3-4 to be safe. No one wants to have to rush out the door to the ceremony, leaving their kitchen strewn with debris.
  • Pay extra close attention to pets while you’re creating your bouquet. Dogs and cats gravitate toward crunchy, fresh flora, so they may be circling beneath you like sharks or waiting for you to turn your back in order to steal a taste. Because plants and flowers can be really harmful to pets, consider keeping them in another room if possible until you are done with the bouquet and clean-up or enlist a friend or partner to keep their eyes peeled.
  • A bouquet can last well over a week if kept fresh with water and nutrients after the ceremony. Cut the stems on a 45 degree angle under water and then return them to a vase of water that has been fortified with the packets of flower food that come with loose flowers or make your own concoction by diluting half a teaspoon of bleach and half a tablespoon of granulated sugar into a half gallon of room temperature water. The bleach keeps bacteria down (the #1 cause of early flower death) and the sugar feeds the flowers. Keep this mixture on hand and empty, rinse, and refill the vase with new solution every day. Keep flowers in a cool place that receives indirect sunlight and that is far away from fruit, which releases ethylene gases and can cause flowers to shrivel up early.
  • Transporting a bouquet to a wedding venue can prove a challenge. Creating a stable holder, though, takes just a few minutes. Find a box that is wider than the bouquet (for stability), but that is still easy to carry. Next, seek out a jar that is nearly the same height as the box, but no shorter than an inch below, or longer than an inch above, it. You will want a jar that is at least 4 inches wide so that the base is not too narrow to support the top-heavy head of the bouquet. Wrap the mason jar with brown paper or newspaper in order to give it some padding and tape well. Place the mason jar in the center of the open box and fill all open space around it with filler or any kind – again, newspaper works well here. Fill it tightly so that the jar cannot slide around. Close the lids of the box and tape shut, then cut out a square around the mouth of the jar. If the jar is slightly taller than the box, cut the square before putting the mason jar in the box and taping down the lid. Fill the mason jar with water and flower food solution and insert bouquet. Before leaving, loosely wrap a plastic bag around the head of the bouquet to keep it clean. Check out the quick photos I took with my phone for a better idea of how to efficiently transport the bouquet – photo 1, photo 2, photo 3, photo 4.

DIY Vanity Trays

DIY Vanity TraysI track my femme roots these days back to my mother and grandmother who always worked within the confines of what they had – whatever shape and size of body, whatever financial means – to project confident, unwavering femininity. While make-up, jewelry, and perfumes do not, of course, make the femme, what I locate in them as femme-inine is the process and the pleasure, for my mother especially, that comes in adorning herself in heavy scents and lipsticks.

DIY Vanity TraysFor my grandmother, it’s the fun in assuming and identifying glamour in loud, fake jewelry (when she was younger) and the ability to stretch a dime without sacrificing her desired image. One of my favorite memories is of her showing me how to layer perfume on top of unscented lotion; the oils in the lotion hold on to fragrance longer, requiring one to use less, stretching the bottle further. We both still use that trick today.

DIY Vanity TraysIt’s no surprise then that as a little kid, the definition of fun was sitting at my mother’s vanity, or in front of my grandmother’s dresser, and admiring their things. Both kept neat, organized trays on top of their furniture where they lined up their favorite perfumes, lipsticks, and various pieces of jewelry. When I thought they weren’t looking, I would slide rings on to every finger, dig through earrings to find the shiniest clip-ons and spray myself up and down with various scents. You could smell me coming a mile away, but even if that hadn’t been the case, the jig was up when I broke out in a case of hives from too much Chanel no. 5.

DIY Vanity TraysMore or less a grown-up now myself, I also love a vanity tray and after changing some colors and patterns in my bedroom recently, wanted something bold, but pretty to keep my own everyday baubles arranged and accessible. When I saw these pastel hexagonal trays at Target in the dollar section, I knew I could use them in a variety of ways, but the vanity trays were first on my list.

With a little paint, scrapbook paper (which was also in the Target $1 bin!), and sealant, these trays are instantly upgraded to elegant, modern places to keep trinkets, keys, or even to hang on a wall as art. For me, they’re just the spot to keep my favorite perfumes, my current nail color, and my jewelry of the moment. Having a landing spot for these things helps keep mess contained and also from having tiny earrings roll away never to be seen again (…she says, having just lost a new earring last month in this exact fashion).

DIY Vanity TraysThese are a cute and creative DIY Mother’s Day gift, but also serve well as a small treat for just about anyone – who doesn’t need a spot to drop keys or spare change? For those of you heading into wedding season, what a cute little gift for a bestie or friend who is recently engaged or married as a new place to put their rings, as well. The ways to gift these are about as limitless in number as the ways to decorate them.

DIY Vanity Trays

Supplies:
Plastic hexagonal tray from Target’s Dollar Spot (or any other plastic tray or shallow vessel will do)
Scrapbook paper
Scissors
Pencil
Metallic gold acrylic paint
Mod Podge Gloss
2 Foam paint brushes

Directions:
Place the hexagonal tray on top of a piece of scrapbook paper and trace the outline of its base onto the backside of the paper. Carefully cut out the outline with scissors and set aside.

On a work surface, paint the tray with the metallic gold paint using one of the foam brushes. Apply one coat to all sides of the tray, as well as the interior. I did not paint the bottoms, but you certainly can if you’d like. Allow this first coat to dry and then assess if you will need a second and even, possibly, a third. After each coat, allow the paint to dry completely before applying another.

When the tray has received it’s last coat of paint and is completely dry, apply a thin coat of Mod Podge to the interior base of the tray and place your cut piece of scrapbook paper on top of it. Press down from the center and smooth out the paper working outwards. If bubbles develop under the paper, simply press them out to the edges and release them. Once the paper is in place and no bubbles remain, apply a thin coat of Mod Podge to the top surface of the paper, as well as to the sides you’ve painted. When it has dried, consider applying one final thin coat of Mod Podge to the paper if needed and allow to dry completely. When the Mod Podge has hardened to a glossy shine and is no longer tacky or wet to the touch, your trays are ready to use.

Two notes: Applying too thick of a layer of Mod Podge at any point will result in a tacky feel to the tray, so keep your layers thin to avoid this. If while pushing out air bubbles you accidentally cause a small tear in the paper, don’t despair! Cut a small piece of scrapbook paper to fit over the hole (just cut to the size of the tear, nothing much bigger), lightly brush the back with Mod Podge and adhere it to the spot. Once it has some time to dry, go over the patch with another thin coat of Mod Podge and it should blend in perfectly.

DIY Sparrow Place Cards

DIY Sparrow Place CardsI mentioned in my recent Coconut Chocolate Dipped Peeps post that, for me, Easter is a celebration of friends, family, and spring rather than anything religious. So while I’ve made these place cards for my Easter table, they would be a welcome addition to any springtime, or even summer, event that calls for some table flair.

DIY Sparrow Place Cards, SuppliesLook, the reality is that I’m only having 6 people over for Easter dinner – finding a seat is not going to be a real Olympics of the mind situation. That being said, though, I think a beautiful table is as important as the food you put on it when making a memorable day. In this case, that means having adorable sparrow-shaped place cards adorning everyone’s spot. My goal any time I host a meal or a party for friends, whether it be a small brunch with a bestie or a larger gathering to welcome a friend in from out of town, is to create the feeling that this day is special and that the people attending are cared for.

DIY Sparrow Place CardsEspecially for the queer folks among us whose family situations may be tenuous at best, gathering around a table with others specifically on a holiday can bring up a lot of conflicting feelings – including sadness and even relief. Surely, it’s all a process, but if taking the time and effort to make the day beautiful and the atmosphere warm gives someone a sense of home in the meantime, creating that is important to me. How could anyone see this pretty little thing perched atop their plate and not feel welcomed?

DIY Sparrow Place Cards

What’s nice about these place cards is that while they’re festive and, in many ways, seemingly elaborate, they require little skill and once the parts that involve tracing and cutting are done, they come together quickly. My dear friend, Katie – my co-host for our Easter/Springtime Celebration of Friends – and I knocked these out in about an hour after everything was cut out and ready to go. Another fun fact: they cost only about $1.50 each to make!

We chose sheets of scrapbook paper that coordinated with our color scheme in a variety of patterns – floral, polka dots, and plaid – so that regardless of gender or personal taste, everyone will have a place setting that appeals to them along those lines. Not that I expect the gents among us to really hold on to their tiny bird place cards afterward, but you know, thoughtfulness is next to godliness or something.

DIY Sparrow Place CardsWe really saved here in creating our own nests out of tiny vine wreaths that were about 50 cents at our local craft store, as opposed to pre-made nests of similar materials which were upwards of $3 each. For added realness, we added Spanish moss and tiny eggs to our DIY bird nests, which we would have used to decorate the $3 nests too, so we really did save quite a bit without sacrificing the look we were after or a bunch of extra time.

DIY Sparrow Place CardsWith several days left before Easter and many more days of spring and summer ahead of us, there’s plenty of time to add these sparrow place cards to your dining decor. Whether you’re a table of two, 12, or even 100, these are the perfect way to welcome guests and, simultaneously, tell them where to park it. Two birds, one stone.

DIY Sparrow Place Cards
Yields one place setting

Supplies
1 sparrow template, re-sized, printed, & cut out; I used this.
1-2 sheets of sturdy scrapbook paper; 1 sheet if you don’t mind the back having the same pattern as the front, 2 sheets if you want to combine patterns
Glue gun & glue sticks
Craft glue or Elmer’s glue
Small vine wreath
Spanish moss
One sheet of plain, white printer paper
Sharpie or other thin marker, color of your choice (you can also use the printer for writing names if you’re not great with handwriting; more on that below)
Scissors
Small, plastic bird eggs
Pencil

Directions

Step 1: Plug in your glue gun and allow it to heat up on the high setting.

Step 2: Using a pencil, trace the outline of your sparrow template onto your scrapbook paper so that you have a front and back with the pattern(s) facing outwards. The two cut-outs should be facing the same direction so that when glued together, they match up giving the bird weight and stability to stay upright in the nest.

Step 3: When you have both pieces cut out, use the Elmer’s or craft glue to adhere the front and the back together, but leave the beaks unglued for adding the name banner later. Set aside to dry.

Step 4: Free a small handful of Spanish moss from the bag. With the wreath on a flat surface, apply a ring of hot glue to its top edge and, working quickly, gently apply the Spanish moss to edge of the wreath concentrating the bulk of the handful into the center, creating a bit of a well. Be careful not to burn yourself. Once the glue is more warm than cool, press the moss more firmly into the setting glue along the top edge of the wreath. Allow to dry.

Step 5: Place a small bead or two of hot glue into the middle of the well of Spanish moss and place the feet of your sparrow into it, holding the bird part upright until it has dried and can support itself standing.

Step 6: Add some hot glue into the well in front of the bird, as well as behind and fill any holes or spaces with small bunches of the Spanish moss. You’ll want to partially obscure the feet so that it seems they’re nestled in the nest. Trim stray Spanish moss pieces with a scissor, as needed.

Step 7: Use a bead or two of hot glue to secure two eggs onto the rim of the wreath within the Spanish moss and allow to dry.

Step 8: Lastly, create and adhere the name banner. You can do this one of two ways. Initially, I cut out small banners made of white printer paper and hand-wrote the names, but later chose a font and color I preferred more, printed each of the names out on one sheet of paper, and cut out the banners from there. It’s up to you which option you choose. When envisioning your banners be sure to consider that about 1/4″ of one end will be between the the two sides of the beak, so make sure you cut the banners long enough. With the banners printed, apply a small dot of Elmer’s or craft glue between the two sides of the beak and insert the beginning of the banner. Press the two sides of the scrapbook paper together to adhere them together, setting the banner between the beaks. Allow to dry.

Step 9: Trim any stray pieces of Spanish moss or strings from the glue gun and store until ready to use.

Upcycled Bathroom Jars

Upcycled Bathroom JarsI don’t know how other bloggers do it where they push out exciting, creative content several days a week, sometimes, more than once a day. Even with some patched together work schedule that doesn’t fully resemble “full-time” yet, I still require a few days to get one project and post together. Part of the reason belongs to the great Minnesota winter that provides only a small amount of daylight, and even less time shining through my kitchen and living room windows. Which means that if there are beautiful pictures to take, it has to happen between 11am and 2pm or it’s a total disservice to the efforts of the recipe or the project. Indoor light is not a photograph’s friend.

Needless to say, this is a tight window to work within and a really strict schedule to try and keep. I’m saving up for a digital fluorescent lamp that will allow me to shoot photos even as the outside light grows dim, but until then, I’m working with what I’ve got: big clean windows, shade from an overgrown oak tree in my neighbor’s yard, sunshine peeking through from the Northwest, and foot-upon-foot of bright white snow that acts as a natural reflector of what sunlight there is. I’ll get by.

Upcycled Bathroom JarsSometimes, I’ll start a project, like these simple, upcycled jars for my bathroom, and before I know it, dinner is being prepped, or planning for tomorrow’s lecture gets underway, and before I can snap a photo and fill you all in on what I’ve made, they get put into use – worked into the day-to-day life that’s happening here. I put these jars together in October or so, fresh off the renovation madness, to fill the new shelving in my bathroom and find a home for small items like cotton swabs, bobby pins, and hair elastics.

Upcycled Bathroom JarsI tend to hoard uniquely shaped glass jars for when I make a vinaigrette or want to send a visitor home with a special treat, so these cute ones were already tucked into my cupboard awaiting a facelift and, in no time, flat they were oh-so-simply transformed into colorful, functional bathroom storage! In some ways, it feels like putting a tutorial together for these is insulting, as all they required was a little paint and a little glue, but for the easily daunted among us, I’ll post one below. I think of these jars as less a formal craft and more of a quick attempt of making something beautiful, functional, and inexpensive out of nothing. Even something as ordinary and uninspired as a pickle jar! More things in life should be this satisfying and quaint.

Upcycled Bathroom Jars
Upcycled Bathroom
Jars
Note: While these jars have knobs on them, their purpose is more decorative than functional, i.e. I glued mine on. I open the jars with a regular twist on the rim of the lid. If you want to use the knobs as intended, a drill & a screwdriver will get you there nearly as quickly.

Supplies:
Various glass jars with the matching lids
Small drawer knobs (I used these cheapies from Ikea)
Acrylic paint of your choice
Paint brush
Hot glue or another strong, bonding glue
Dish soap
Water
Fork, as needed
Sponge with a rough, scrubby side

Directions:
Fill your sink with hot soapy water and submerge jars and lids. If jars have a label, use a fork to carefully pierce the label in several spots before adding the jar to the water. Jars that have held strong-smelling foods, such as pickles, roasted red peppers, etc., may need an extra bit of soap swished around inside them, as well as rubbed into the inside of the lids, or just a second soak altogether. Allow the jars to soak for about an hour, peeling off any labels that will budge after a half hour, and using a sponge to remove all glue residue after the 60 minutes has passed. If the glue is giving you a hard time, you can soak the jar problem-side down in a few inches of hot water, dish soap, and a few tablespoons of white vinegar. Another option is to try rubbing any kind of regular kitchen oil onto the glue and then buffing it off with a rag. If you use the latter technique, be certain you re-wash your jars and allow them to dry again before proceeding.

After your jars are clean and dry, apply a layer of acrylic paint to your jar lids and allow to dry. Repeat for 3 coats or until desired color is achieved. Allow the lids to dry completely, then apply a small bead of hot glue to the middle of the jar and press and hold your drawer knob on to the lid until it is secured. Allow to dry and cool. Fill jars with your desired contents and affix the associated lids. For added charm, apply a strip of washi tape across the center of the lid, or on the front of the jar, to serve as an easy, breezy label. This works best for jars not intended for the humid environment of the bathroom.

‘Hibernate With Me’ Pillowcases

Hibernate With Me Pillow TutorialValentine’s Day is upon us once again, which means many of us are searching for a creative way to make someone we love feel special on February 14th and, really, all days of the year. While I can’t imagine anyone turning their nose up to any kind of candy or flower, a homemade project is a safe bet in getting your point across that you’ve got ALL.THE.FEELS. for your loved one. More than making something adorable or pretty that I know my sweetheart or dearest friend will appreciate, I’m all about also making sure that item is useful. No one needs an extra something – no matter how whimsical – to sit on a desk collecting dust, am I right?

Last year, I jumped on the ever-popular bandwagon of making long distance love mugs with Sharpies for two of my beloved friends on opposite coasts. They were a huge hit and inspired copious selfies drinking coffee out of our coordinated drinkware sent to each other via text. This year, I wanted to make something that was more romantically inspired; something you could gift to your boo(s), or the sweet thing you’re out to woo. Being that Bear is the apple of my eye, I started brainstorming ideas from there and eventually got to here with these ‘Hibernate With Me!’ pillowcases. These might look tricky to the less tech-savvy among us, but fear not! I’ve taken all of the work out of this for you and hooked you up with each and every one of the images you will need to re-create these beauties. All you need to do is download them, hit “print” on your printer and do some light ironing. Full deets to follow below!

First things first, it’s a miracle I even came up with a concept so adorable – “Hibernate With Me?” Come on! That’s so cute! I am *the worst* at coming up with slogans or catch phrases for things. If you knew how many ideas I went through before I named this blog, you’d pat me on the head a few times in second-hand embarrassment. I must have had the right amount of orange juice the morning I remembered that bears, in fact, hibernate – not to mention that ‘hibernating’ with a sweet someone is something most people want out of their Valentine’s Day! – in order to come to this, but when I did, I knew it had staying power.

Hibernate With Me Pillow Tutorial
I decided to use this idea on pillowcases for a few reasons, but mainly the first two that come to mind: 1) they suggest bedroom time with your sweetheart and 2) they’re an inexpensive option as opposed to creating a set of throw pillows. Maybe that last point is gauche when it comes to creating a gift, but I’m a thrifty girl who likes to keep an eye on her spending and DIY pillowcases make for an adorable, affordable choice. After considering a few options, like painting the lettering or using those fuzzy sew-on letters, I decided to look into the option of iron-on transfers and found that Avery makes some pretty highly regarded transfers that you can run right through your printer.

We live in the future.

Once I knew how I was going to execute this project, I focused on finding an image to accompany it. I wound up free-handing this one based on some examples I saw online and then, wanting to keep with a bright, cheery look, chose a simple red polka dot pattern to fill the bears with. My last decision was selecting a font in a trifecta of valentine-themed colors to really make things pop. After flipping the images horizontally in Photoshop (you have to print their mirror images so that when you iron on the transfer it reads correctly from left to right), it was an easy print on my standard inkjet, and then just a matter of cutting out the pieces and aligning them accordingly onto the pillow cases before hitting them with the iron.

A little bit of patience is needed for these. You’ll want to use a ruler and be deliberate in checking that you have the images centered and equal on each case so that when they’re side-by-side they read as a set. The arrangement and the measuring is, in all honesty, the most time-consuming part of the whole process and that’s pretty much 10 minutes if you’re being extra careful. Follow the instructions that come along with the transfers for the best results; I had only one spot where one of my letters didn’t fully adhere and I just gave it some more heat and pressure before it set perfectly.

Hibernate With Me Pillow TutorialCan’t you just imagine throwing open the bedroom door for your valentine to these propped up on your bed? It’s ok if you have to fan yourself thinking of the reaction it might cause. These pillowcases are sure to make anyone see hearts…just ask our meow, Ollie. He’s totally ready to hibernate. Like, anytime, all the time.

Happy Valentine’s Day!

‘Hibernate With Me’ Pillowcases
Supplies:
2 standard white pillowcases (100% cotton is best for the transfers)
1 package of Avery Light Fabric Transfers for Inkjet Printers (#03271)
Inkjet Printer with black & colored ink cartridges
Scissors
Iron
Ruler
Hibernating bear & text images, downloaded

Directions:
Read the instructions that come with the fabric transfers very carefully. Set iron to highest cotton setting and turn off steam feature. Allow to warm up for at least 5 minutes. After downloading the bear & text images, do a print preview of the images to make sure they’re scaled to the page and then print them according to the directions from Avery and set aside. You should print two bears that face left, two that face right, and one copy of each text image. You will notice that two text images are written backwards. This is correct. You need to print the text as a mirror image in order to have it read correctly when transferred.

Iron pillowcases lightly to rid of wrinkles and allow to cool. Cut out the bears and text images. Because of the size of the printer paper (8-1/2″ x 11″), you will need to cut the “Hibernate” out in two halves – hiber & nate – and align and affix together on the pillowcase. You will need to do the same with aligning the “With Me!” I chose to cut out the entire words and not each individual letter so that I didn’t have to worry about aligning all of the letters individually.

Work on one pillowcase at a time. Find the center of your pillowcase and arrange the bears as you see fit. Again, following the instructions from Avery, apply the heat and pressure of the iron to affix the bear transfers. Allow to cool as you measure and align the “Hibernate” above. It may help to keep a note to yourself with how many inches in from the edges the bears are, how many inches are between the top of the bear and the bottom of the word, etc., so that you can easily apply these same measurements to the other case. Once your “Hibernate” is aligned, apply the heat and pressure of the iron and then allow to cool. Replicate this process with the second pillow case. Allow both cases to cool before use. Wash inside out and on delicate or by hand for longevity.

DIY Garden Markers

Let’s pretend it’s for real spring. Like, the kind of spring that blows in with warm days and cool nights, that lasts a few weeks before the temperatures really rise and the humidity of summer is upon us. Let’s pretend the 70-degree days of just this past weekend hung around, that it didn’t drop 40 degrees overnight, and that I didn’t, prematurely, put away the down comforter. Let’s pretend that I was able to spend part of the day outside today turning over my small gardening plot in the side yard, laying down new ground cover, and bringing home my plants from the store. Let’s pretend that it didn’t, instead, flurry this afternoon, forcing me to drag my slippers back out and abandon my pitcher of iced tea in the fridge for the hotter, steamier variety.

Sigh. Let’s just pretend.

You see, I wanted to take photos of these adorable DIY garden markers among the beautiful, green, thriving plants of a garden, but Midwestern weather and I are having a bit of a tiff right now, so that’s not yet possible. For some of you, it may have already happened, while for others of us it feels like a distant dream, but whenever your vegetable garden is planted, consider brightening it up a bit with this simple craft, no? Most of the items needed are available from your local dollar store and the rest, which can be found at a craft store, or even Amazon, will only run you a few dollars more.

The best part about these, aside from being really cute and totally unique, is that a few thick coats of Mod Podge make them washable and able to stand the test of time by not peeling or chipping. They’ll last for years to come, fairly safe from the elements (I can’t yet promise that they won’t fade), which also makes them a really wonderful gift! Did someone say, Mother’s Day?

I just labeled my set with a marker and some cute handwriting, but I can see using a fancy paper cutter, like a Silhouette or a Cricut (oh, how I yearn for one or the other!) to create more elegant lettering, should you have access to one. Depending on fonts, colors, and pattern of paper, the sky is really the limit in how you customize these for your own. Charlotte made the green ones below to match her manicure. How femme is that?!

Since it seems I still have a few weeks to go in prepping my summer garden, I’ll be sending this batch to my mother and grandmother in hopes my good deeds will have me rewarded with some sunshine and warmth. Hopefully, they’re up for the task of growing more than tomatoes and basil this year! What’s on your list to grow this summer?

DIY Garden Markers
Supplies:
Wooden spoons
Acrylic craft paints
Foam brushes
Paper plates for your paint palette
1 piece of scrap paper for the label’s pattern
Craft glue
Mod Podge, original
Scrapbook paper
Scissors
Sharpie marker

Use the outline of a wet spoon on scrap paper to create a pattern for your labels.

Directions:
To create your DIY Garden Markers, first paint your wooden spoons with two coats of acrylic craft paint. As you finish the last coat of your final spoon, place the spoon on it’s back onto the piece of scrap paper to make a mark, as seen in the image on the right. This mark will serve as your pattern for spoons’ labels. Finish painting the final spoon and allow to dry. Cut out the pattern for the label and then use it to carefully cut shapes out of the scrapbook paper for each spoon. When all of your labels have been cut out, use the marker to write the name of each vegetable. Adhere a label to the back of each spoon with craft glue, smoothing out any wrinkles as you go. After each spoon has had it’s label affixed, paint the entire spoon from top to bottom with a fairly thick coat of Mod Podge. Continue applying first coat of Mod Podge to all spoons. When finished, begin again with the first spoon and apply a second coat. You will want to apply a total of 3-4 coats per spoon. When finished, allow the spoons to dry completely. I suggest waiting at least 12 hours before using.

 

DIY Cat Toys, or Superfluous Photos of My Cats

Moving in together is an exciting point in any relationship, but when Bear and I U-hauled it, one of the greatest perks was getting to double our number of meows, forming our tiny family of 4. Since we’re not the kid-having kind, Lula and Ollie are, of course, our less messy, way furrier, substitutes and we’re fairly obsessed with them. I mean, sometimes we make up songs about them. They also each have a (totally fabricated) dramatic backstory of their lives before us and about 14 aliases a piece. Don’t judge. The first step is acknowledging you have a problem, right?

Anyway, while putting the final touches on my Lazy Kitten Sleep Mask two weeks ago, I was swarmed by the fuzzy gray and white duo who had suddenly developed an interest in crafting; or at least in things like spools of thread and the crinkly sound of Velcro. Plying them with treats, nor gentle scolding, really made much difference, so I put my sleep mask on hold to accommodate my two feline assistants and stitched up a quick cat toy for them of excess fabric to bat around the house.

I had no stuffing around to fill the toy with, but being fairly resourceful, I dug out some cotton balls from the bathroom to use in its place. This is just a small toy, so just a few cotton balls did the trick. Before filling the little heart shape I had cut out and hand-stitched together, I rolled the cotton balls in some dried catnip to give the toy a little something extra.

Breaking out the catnip and filling the toy only invited more investigation, so I acted quickly to sew up the remaining open space on the side and tossed it into the living room. There, it was promptly smothered with love before becoming the prize in a mutual game of keep away. Needless to say, they thought it was the cat’s pajamas and that made me feel pretty darn satisfied. Bringing joy in even the simplest ways is truly the heart’s best medicine, no?

Quick Heart-Shaped Cat Toy
Supplies:
Enough scrap fabric to cut out two hearts about 3.5-inches in width and 2-inches in height
Coordinating thread of your choice
Sewing needle
Scissors
Pins
Approximately 5-8 cotton balls
1 teaspoon of dried catnip

Directions:
Step 1: Cut one heart out of the fabric either by freehand or by making a simple paper pattern. Use the first fabric heart as a guide and pattern to cut out a duplicate. Step 2: Put the two hearts together with the frontside of the fabric facing inward and pin together. Step 3: Thread your needle and stitch the heart together leaving a 1-inch opening remaining. Tie off the thread, snip excess, remove pins, and turn the heart right side out. Step 4: On a plate, or in a bowl, place the cotton balls and sprinkle catnip on them until they are fully covered. Fill the heart with as many cotton balls as needed and stitch the remaining hole closed.